This product can detect the change or component of powder or mixture accurately by measurement of capacitance.
The conventional electrostatic capacitance meter was not suitable for quality control at a factory. Because it was designed for measurement of parts like a condenser.
CM-112N and CM-113N that the detection electrode is set to one end ground has an emphasis on ease of use as an industrial measuring instrument by eliminating the influence of distribution capacity.
●Measurements of the dielectric constant is very easy.
●Measure accurately the capacitance without being affected by the conductivity.
●This is easy to use in the manufacturing site, because the detection electrode is set to one end ground.
●Connection cable to the electrode can set till 5m. It does not affect the measurement.
●Can use this for the control of field equipment, because this can take out the 4/20mA output signal.
●Can select the electrode along the purpose, or can be designed special electrodes.
Model type | CM-112N | CM-113N | |
Specification | Power input | AC100V±10% 50/60Hz | |
Display | Each3 1/2digits | ||
Output | DC4~20mA:Load resistance 450Ω or less DC0~10V:Load resistance 5KΩ more | ||
Measurement range | Electrostatic capacity | RANGE × 1 100.0pF × 10 10.00pF × 100 1.000pF also×1.00~11.0 With span dial (Highest sensitivity10V/0.1pF) Conductive automatic correction range:20KΩ up | |
※Manufacture product your specified. | RANGE × 1 100pF × 10 10.0pF | ||
Conductivity | 1000μS Conductive automatic correction range:1KΩ up | ||
Accuracy | Linearity error | At room temperature~55℃, ±0.5% or less | |
Temperature characteristic | Zero-point error ±0.01pF Sensitivity error ±0.1%×Indicated value |
At room temperature~55℃, ±0.5pF+0.5%×Full scale ±0μS+0.5%×Full scale | |
Chopper cycle | 33.3mS(60Hz)・40mS(50Hz) | ───── | |
Measurement frequency | 200kHz(There is a possibility of change) |