Example of LT,DS series electrode shape
A level sensor may not be installed depending on the size and shape of the pipe or tank, and it may be difficult to measure depending on the composition of the object to be measured. Therefore, prior consultation is important and essential. ※Precautions for attaching electrodes Click here
F2T
（High temperature resistant）
This is the high temperature resistant type of F2-model.
S1（Corrosion resistant ）
This product very often installed vertically. When the object to be measured is a corrosive substance, you use this product by covering the electrode with a tube.
P2
（Small electrode type）
This product is used to detect blockages in pipes or to measure small tanks.
S2W
（With wire hanging type）
This product is a hanging electrode by wire, easy insertion of long electrodes.
In order to view the PDF files, you need Acrobat Reader which is distributed free of charge from Adobe Systems, Inc.
Precautions for attaching electrodes
- Make sure that the width of ℓ is 10 mm or more. If the object to be measured adheres to the tank wall, the width of ℓ should be the thickness of the object plus 10 mm or more.
- Do not allow water, sand, or dust to enter the amplifier case. Do not shorten the electrode by yourself. Please contact us if you need to change.
- Install and wire so that water, sand, and dust do not enter from the lead outlet.
- Electrodes can be installed vertically or horizontally.
- When installing the electrode horizontally, make sure the lead outlet mouth downward.
ℓ＝10 mm or more.
